10. Light Kit Assembly (Optional).
page 9
motor housing
glass shade
bulb
socket ring
light kit fitter
11. Testing Your Fan.
switch housing
pull chain
extensions
(for fan)
(for
lights)
reverse switch
It is recommended that you test fan before
finalizing installation. Restore power from
circuit box and light switch (if applicable). Test
fan speeds with the pull chain located on the
switch housing. Start at the OFF position (no
blade movement). First pull will set the fan to
HI. Second pull will set the fan to MEDIUM.
Third pull will set the fan to LOW. Fourth pull
will again set the fan to OFF setting. Test lights
with the pull chain located in the middle. If
fan and/or lights do/does not function, please
refer to "Troubleshooting" section to solve any
issues before contacting Customer Service.
Turn fan completely off
before
moving the
reverse switch. Set reverse switch to
recirculate air depending on the season:
- DOWN position in summer
(
diagram 1
)
- UP position in winter
(
diagram 2
)
A ceiling fan will allow you to raise your
thermostat setting in summer and lower your
thermostat setting in winter without feeling a
difference in your comfort.
Important
: Reverse switch must be set either
completely UP
or
completely DOWN
for fan to
function. If the reverse switch is set in the
middle
position (
diagram 3
), fan will not
operate.
Attach pull chain extensions provided or
custom pull chain extensions (sold separately)
to the ends of the pull chains.
diagram 1
diagram 2
diagram 3
socket
Remove socket ring from each socket. Use
1 socket ring to attach each glass shade.
WARNING
: Do NOT overtighten socket rings as
glass may crack or break.
Install 2 medium base 9 watt max. LED bulbs
(included).
IMPORTANT:
When you need to replace
bulbs, please allow bulb(s) and glass shades(s)
to cool down before touching them.
