page 8
10. Light Kit Assembly.
9. Blade Assembly.
WARNING
: To reduce the risk of serious bodily injury,
DO NOT use power tools to assemble the blades. If
screws are overtightened, blades may crack and break.
Time Saver
: Washers for blade screws can be set on each
blade screw prior to installing blades.
Locate 9 blade attachment screws and washers in
hardware pack. Slide blade through one of the narrow,
rectangular openings on motor housing, aligning holes
in blade with holes in blade arm (
located on the
underside of the motor housing
)--
refer to drawing at
right
. [
Be sure to note label on blade indicating
THIS SIDE
UP
.] Insert 3 blade attachment screws (along with
washers) with fingers first and then tighten screws
securely with a Phillips screwdriver. Repeat procedure for
each remaining blades.
Note
: Tighten blade attachment screws twice a year.
Remove 1 screw from motor plate on underside
of motor housing and partially loosen the other 2
screws.
Connect
WHITE
wire from motor housing to
WHITE
wire from LED light kit. Connect
BLACK
(or
BLUE
) wire from motor housing to
BLACK
wire
from LED light kit. Be sure molex connections
snap together securely. [
Note:
If you will NOT be
using the light kit, do NOT connect the molex.]
Carefully arrange wiring within LED light kit. Align
slotted holes in LED light kit with loosened screws
in motor plate. Twist LED light kit to lock.
Re-insert screw that was previously removed and
tighten all 3 screws securely.
Locate slots on shade and align with nodules on
inside of LED ligt kit.
Gently push up on shade and
turn
to the RIGHT (clockwise)
until it slides
completely into place.
If you do NOT wish to use the light kit
,
locate slots
on metal cover and align with nodules on inside
of LED light kit. Gently push up on metal cover
and turn to the
RIGHT (clockwise)
until it slides
completely into place.
CAUTION
: D
o
not
connect the LED light kit if you
do NOT wish to use the light.
blade
blade attachment
screws and washers
blade
arm
motor
housing
LED light kit
LED light kit
slots
nodule
shade
molex connections
motor plate
LED light kit
slots
nodule
metal cover
