Craftex CX413, Руководство пользователя

Страница: 10 / 17

10
Attach the handle (#62) to the canister filter
(#55) and secure it with the set screw 5/16"
x 3/4" (#61) and nut 5/16" (#60) as shown in
figure-8.
Figure-8 Attaching the handle to the
canister
Now, attach the canister (#55) to the main
housing (#16) and tighten with the gasket
(#64 not shown) between. Secure it using
flange bolt (#8) and nut (#26). See figure-9.
Figure-9 Installing the canister filter
Attach the Y-inlet adapter (#18) to the main
housing (#16) and secure it with Philips
head screw 3/18" x 3/8" (#17). See figure-
10.
Paste the foam (#54) as a circle around the
canister filter (#55) and tighten the PE bag
(#52) with bag clamp (#53) as shown in
figure-10.
Figure-10 Installing the inlet adapter and
PE bag
Place the drum lid (#40) on the drum and
position the drum (#48) under the main
housing. Attach one end of the hose (#39)
to the cone (#33) and the other end onto
the drum lid (#40). Use the hose clamps
(#38) and secure it on both ends. See
figure-11.
Figure-11 Installing the hose