Craftex CX413, Руководство пользователя

Страница: 12 / 17

12
REMOTE CONTROLLER
The CX413 features a remote controller
(#50) that allows you decrease or increase
the amount of time the impeller runs before
automatically shutting off.
Press the "ON Button" to turn on the
machine and then press the "Increase
Button" to increase the amount of time.
Each time you press the "Increase Button"
the amount of time is increased by two
hours up to a maximum of 8 hours cycle
and the light for the selected time
illuminates on the remote controller.
Decrease the amount of time by pressing
the "Decrease Button". See figure-15.
Figure-15 Remote controller for CX413
TEST RUN
Once you have assembled your machine
completely, it is now time for a test run to
make sure that the machine works properly
and is ready for operation.
All the tools and objects used for
assembling the machine should be
removed and cleared away during the test
run.
Plug the cord to the power outlet and turn
the machine ON. Test the ON, OFF and
Emergency Stop buttons make sure they
are working properly.
During the test run if there is any unusual
noise coming from the machine or the
machine vibrates excessively, shut off the
machine immediately and disconnect the
cord from the power source. Check all the
parts you have assembled, once again and
investigate to find out the problem.
WARNING!
Before turning on the machine, make
sure you have read and understood the
instructions given in the manual and you
are familiar with the functions and safety
features on this machine. Failure to do
so could result in serious injury to the
operator or damage to the machine.