Craftex CX413, Руководство пользователя

Страница: 8 / 17

8
PROPER GROUNDING
Grounding provides a path of least
resistance for electric current to reduce the
risk of electric shock.
CX413 is equipped with a 220-volts, single
phase motor which features a 3-conductor
cord and a 3-prong grounded plug to fit a
grounded type receptacle. Do not remove
the grounding prong to fit it into a 2-pronged
outlet. Always check with a qualified
electrician if you are in doubt.
Make sure the cord is plugged into a
properly installed and grounded power
outlet.
To prevent electrical hazards, have a
qualified electrician ensure that the line is
properly wired.
This machine is for use on a normal 220-
volt circuit and is factory-equipped with a
specific electric cord and plug to permit
connection to a proper electric circuit. Make
sure that the machine is connected to an
outlet having the same configuration as the
plug.
Figure-3 220-Volts outlet for CX413
It is strongly recommended not to use
extension cords with your CX413. Always
try to position your machine close to the
power source so that you do not need to
use extension cords.
If you really find it necessary to use an
extension cord, make sure the extension
cord does not exceed 50-feet in length and
the cord is 14-gauge to prevent motor
damage.
WARNING!
Improper connection of the equipment-
grounding conductor can result in a risk
of electric shock. Check with a qualified
electrician if you are in doubt as to
whether the outlet is properly grounded.