Craftex CX212, Руководство пользователя

Страница: 17 / 29

17
MAINTENANCE
During the life of your machine, you will
need to practice some regular maintenance
to keep your sander in peak performance
condition.
Check the machine for any loose mounting
bolts, damaged blade, work or damaged
wires or any other unsafe condition daily
before use.
Regularly vacuum all sawdust from the
saw’s interior and vacuum the motor
openings as well.
The unpainted components such as the
precision-ground cast-iron table top should
be protected with a coat of paste wax and
then buffed dry.
Check drive belts for wear and correct
tension on a regular basis.
Check that the blade guard and anti
kickback pawls operate properly.
LUBRICATION
It is important to clean the parts before
lubricating them.
Apply a thin layer of grease to the
lubricating locations shown in the following
figures.
Figure-21 Lubricate lead screw
Figure-22 Lubricate worm gear and
trunnion slide
WARNING!
Make sure the machine's power switch is
OFF and the cord is disconnected from
the power source when installing /
removing any part or servicing the table
saw.