Craftex CX212, Руководство пользователя

Страница: 13 / 29

13
If the machine starts, immediately stop the
machine. The switch disabling feature is not
working properly. This needs to be fixed
before operating the table saw.
BLADE INSTALLATION
Disconnect the cord from the power source.
Raise the arbor all the way up and remove
the blade guard, table insert and spreader.
Loosen the remove the arbor nut using the
arbor nut, flange, and blade. See figure-15.
Figure-15 Installing the blade
Install the new saw blade, flange and arbor
nut on the arbor and tighten the nut.
Reinstall the spreader, table insert and
blade guard.
BLADE GUARD
The blade guard assembly on your CX212
consists of a clear polycarbonate shield,
spreader and anti-kickback pawls.
The clear polycarbonate guard allows the
operator to see the blade cutting the work-
piece during cutting operation. The guard
covers the blade on both sides and lifts up
as the work-piece is fed into the blade and
returns to the table surface when the work-
piece has passed through the blade. It
prevents the wood chips to fly and injure
the operator and it also prevents from
accidental contacts of objects with the
blade.
At the back side of the guard there is a
metal plate called a spreader. The spreader
prevents the kerf of the work-piece from
pinching the blade and causing kick back.
The kick back pawls are designed such that
they allow the work-piece to move only
forward. During the cutting operation if the
work-piece moves backward, the anti kick
back pawls will dig into it and stop it.
Figure-16 Blade guard assembly
WARNING!
The safety instructions given in this
manual can not be complete because the
environment in every shop is different.
Always consider safety first as it applies
to your individual working conditions.