Craftex CT172, Руководство пользователя

Страница: 8 / 15

8
ASSEMBLY
Before starting assembling your lathe,
make sure the switch is in the OFF position
and the cord is disconnected from the
power source.
TOOL REST
Position the tool rest base on the lathe bed
as shown in figure-3 and secure it from the
bottom of the bed using nut and screw.
Figure-3 Tool rest base installed
Now, Insert the tool rest into the tool rest
base and secure it using the tool rest lock
lever. See figure-5.
Figure-4 Tool rest installed
You can position the tool rest on the bed by
loosening the tool rest lock lever shown in
figure-5 and sliding the tool rest. Re-tighten
the lock lever to secure the tool rest on the
bed when it is in the desired position.
TAILSTOCK LIVE CENTER
The tailstock quill has a taper hole into
which the tailstock live center fits. Turn the
quill movement hand wheel to bring the quill
out. Clean the tailstock center shank and
the tailstock quill hole and fit the tailstock
center into the taper hole firmly by hand.
Tighten the lock lever to lock the quill in
position. See figure-5.
Figure-5 Installing tailstock center
To remove the tailstock center, simply
insert the knockout bar from through the
hole in the quill movement hand wheel and
knockout the tailstock center.
WARNING
Before installing/removing any part of
the machine, make sure the switch is in
the OFF position and the cord is
disconnected from the power source.