Craftex CT172, Руководство пользователя

Страница: 11 / 15

11
RE-SET BUTTON
The CT172 has an overload protection
feature which breaks the circuit and
disconnects power to the motor when the
machine is overloaded. This protects the
motor from damage.
The re-set button located under the
ON/OFF switch, re-sets the switch and re-
connects the power to the motor when
pushed in.
Figure-10 Re-set button
TOOL REST ADJUSTMENT
The tool rest base can be moved along the
bed slide-ways. Loosen the tool rest base
lock lever before adjusting the tool rest
base position and tighten the lock lever
securely after adjustment.
The tool rest should be adjusted so that its
top is 3/16” (suggested below) above the
centers. Loosen the tool rest lock lever
before adjusting tool rest position. Tighten
the lock lever securely after adjustment.
Figure-11 Tool rest base adjustment
TAILSTOCK ADJUSTMENT
The tailstock is used to support the other
end of the work-piece to be turned on the
lathe. The tailstock can be moved along the
bed slide ways. Before moving the tailstock,
loosen the tailstock lock lever. Move the
tailstock by hand to a desired position, and
then re-tighten the tailstock lock lever.
Figure-12 Tailstock adjustment
WARNING
Make sure the switch is in the OFF
position and the cord is disconnected
from the power source before doing
adjustments.