Craftex CT073, Руководство пользователя

Страница: 7 / 30

7
CT073 10” LEFT TILTING ARBOR SAW
ASSEMBLY
Your Craftex CT073, 10” Table Saw is shipped in an almost fully assembled
condition. The exceptions are:
1. Cast-iron Extension Tables.
2. Blade Guard and Splitter.
3. Rip Fence Rails.
4. Rip Fence.
5. Hand Wheels.
Place your table saw on a flat and level surface before proceeding with the
assembly process. Be sure that the mobile base is locked.
Extension Tables
Assemble the cast-iron extension tables as
indicated in the illustration being
certain that the tables are
perfectly level with the main saw
table. The assembly bolts will be
found in the parts packages.
Blade Guard and Splitter
‰
Install the blade guard bracket with the 2 socket-head bolts and finger
tighten only.
‰
Insert the rod through the hole in the rear trunion and secure with a lock
washer and nut. The threads of the guard are cut on an eccentric. This
allows for the adjustment of the back of the blade guard. By rotating the
support rod the rod will move off centre thus allowing for various positions.
Alignment and final tightening will happen when the blade guard is
installed.