20
(b) Crimp the terminal with the ring terminal in the accessory kit as
shown in Figure 3-17(a) or (b):
Figure 3-17(a) Diagram for terminal crimping of grounding conductor
Figure 3-17(b) Diagram for terminal crimping of grounding conductor
(3) Connection of AC output and ground cables
(a) Connect the L1, L2, L3 and Neutral AC output cables to the
corresponding terminals of the socket on the PCB board.
(b) Connect the Gnd cable with a M5 nut at the marked place on the
lower right side of the Wiring box, as shown in Figure 3-18(a). The
Gnd cable can also be connected to the copper stick as shown in
Figure 3-18(b).
