Safety
6 / 27
Doc. No.: 9.0020.0589B0
RoHS SYMBOL
In accordance with 2011/65/EU regulations, the inverter imposes
restrictions on the use of specific hazardous substances in
electrical and electronic equipment.
TUV Certification
This inverter has passed TUV Certification.
Safety precautions of operating the Combiner
Symbol Meanings
DANGER!
Touching the wiring terminals inside the device may result in
death by electric shock!
DO NOT touch the terminals or conductors connected with PV
modules or PV inverters, which may result in death by electric
shock!
WARNING!
All the installation and wiring connections should be performed
only by qualified technical personnel.
Make sure both the AC and DC sources are disconnected, and
the shell of device is securely grounded to avoid electric shock
during maintenance or installation.
DO NOT touch live or exposed parts of the input and output sides
to avoid electric shock when checking or maintaining the device.
CAUTION!
Handle the Combiner carefully to prevent falling off due to its
weight!
Check the device and make sure there is no problem with the
installation before putting it into operation!
Connect the wires labeled L1/L2/L3/PE of the device to avoid
short circuit hazard, to ensure personal safety and the normal
operation of the device.
Although the Combiner is certified to international safety
standards, it will become hot during operation. DO NOT touch
the hot parts of the device during operation.
NOTICE!
Follow all the wiring and safety instructions of the Combiner.
All the wiring and operation must conform to the related local
standard requirements of the device.
IMPORTANT!
The device nameplate contains important information of the
device, such as model, serial number and detailed parameters.
If there is any problem or malfunction of the device during
operation, please contact our after-sales center and provide the
serial number. Our service personnel can provide timely service
for you.
Please keep the nameplate intact.
