InstroTek
39
h)
Backlight Diag – turns the backlight on and off.
i)
SD Card Diag – Writes a string to the SD card and
reads that string back.
j)
USB Drive Diag – Writes a test file to the USB drive
k)
Defaults – Puts all the gauge control data into their
default states.
7)
Select Language
a)
English
b)
Spanish
c)
German
d)
French
8)
Select Units
a)
g/cc – grams of water / cubic cm of soil
b)
lb/cf - pounds of water / cubic foot of soil.
c)
in/ft – inches of water / foot of soil
d)
cm/30cm - centimeters of water / 30 cm of soil
e)
%moist – Water content ( vol.%) = a * count ratio + b
f)
Count – Raw gauge counts / unit time
9)
Serial Number
– Displays and changes the serial
number.
10)
Set Date/Time
– Sets the date and time
11)
Buzzer/Alarm
– turns the buzzer on and off
12)
Logging
a)
Start Logging
b)
Change Log Time – Set the count time for the log ( 0
– 999 seconds ).
c)
Change Number of logs – Set the number of counts
to take ( 0 – 999).
d)
View Log – Displays the results of the last log.
e)
Send to Serial – Sends the results of the Logs out the
RS232 port.
f)
Send to USB – Saves the results of the Logs to the USB
thumb drive
13)
Calibration
a)
Sel. Calibration – If using SIMPLE or DAILY projects,
choose the necessary calibration.
b)
Enter/Edit Cal – Change the values of a particular
calibration
c)
View Calibration – View the values of all 32
calibrations.
