CPG PageMaster 260N, Руководство пользователя

Страница: 201 / 243

Installing DRAM Memory DIMMs
Installing SDRAM MEMORY DIMMs on the Controller Assembly
1. Carefully insert a SDRAM DIMM in any available SDRAM DIMM slot at a vertically as shown below.
When properly seated, gently push down until the DIMM snaps and locks into place.
NOTE: 64MB of memory is standard in the 26ppm printer; however, you can install up to two 256MB modules for a
total of 516MB.
Replacing the Printer Side Cover
1. Insert the top part of the left side cover into the printer. Ensure the locking tab aligns with the hole in the
printer’s side.
CAUTION: ESD-sensitive precautions should be observed when installing the SDRAM Mem-
ory DIMM.