CPC MultiFlex PAK, Руководство пользователя

Страница: 38 / 52

30 • MultiFlex I/O Board Operator’s Guide 026-1712 Rev 3 03-JAN-2008
7.4.6. Screen 6: Outputs
The Outputs screen of the E2 PAK applica-
tion provides output definitions that may be used
to connect PAK outputs to inputs of other appli-
cations for use in extended I/O control. No user
programming is required in this screen when
programming the PAK.
7.4.7. Screen 7: PAK Outputs
The PAK Outputs screen is where you must
assign the functions of each of the eight relay
outputs and four analog/digital outputs on the
MultiFlex PAK.
7.4.8. Screen 8: Fixed Steps
The number of steps that appear on this
screen is determined by the number entered in
the "Number of Steps" field in Screen 1.
For each step, specify which compressor
groups will be active by changing the field in the
numbered column representing the group num-
ber to "X." Inactive compressor groups must
have a "-" in the group number field. Use the
;
and 2 keys to toggle the field value.
Refer to Section , Example of Fixed steps ,
for more information about setting up fixed
steps.
Figure 7-8 - Screen 6: Outputs
Figure 7-9 - PAK Screen 7: PAK Outputs
Figure 7-10 - PAK Screen 8: Fixed Steps