CPC MultiFlex PAK, Руководство пользователя

Страница: 24 / 52

16 • MultiFlex I/O Board Operator’s Guide 026-1712 Rev 3 03-JAN-2008
commissioned in the E2 or REFLECS Network
Configuration screen.
Code B Failure Conditions
• Blinking 2 times/second - This indicates the board
has lost its configuration. If Code B blinks at this
rate on an operational board, it means the board
must be reprogrammed.
This light does not blink if the board is new or is us-
ing the unmodified default configuration.
5.4. Relay Output LEDs
Each relay output point on a MultiFlex has
an indicator LED that shows the status of the
output. This LED is lit to show the output is ON,
and unlit to show the output is OFF.
The definition of ON and OFF in this case is
determined by the position of the fail-safe dip
switch (see
Table 4-5 and Table 4-6 ).