CPA 1041130 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 21

CPA 1041130 Скачать руководство пользователя страница 14

BLUEFIRE HEAT PUMPS MANUAL

pag. 14 di 20

www.cpa-piscine.it

Ver.06

–

2018-05-28

In standby mode, press the scroll, down arrow and up arrow

buttons simultaneously for 3 seconds, and the keyboard will be

locked.
When the keyboard is locked, press and hold the scroll, down

arrow and up arrow buttons for 3 seconds, and the keyboard will

unlock

.

When the heat pump is running and the power supply

is suddenly interrupted, the system, once powered up, will restart from the last mode

set.

Frequently check the hydraulic circuit and cleanliness of the water entering the device. Avoid dry running or the entry

of air into the hydraulic circuit, which would negatively affect the performance and reliability of the unit.
It is advisable to clean the filtration system upstream of the unit regularly to avoid damage to it. Maintain a dry, clean
and properly ventilated environment around the unit.
Clean the condenser regularly.
Check the power cable to see if you perceive a bad smell from the electrical component. If so, contact the installer

immediately.
Please drain all the water present in the heat pump at the beginning of the winter period, for proper wintering of the
device.
It is necessary to completely drain the water from the pump if the unit stops for a long time. After a period of standstill,
before starting the unit again, completely fill the
hydraulic circuit of the by-pass and the pump.

7.

KEYBOARD LOCK

8.

MEMORY BACKUP AFTER POWER RESUME

9.

MAINTENANCE

«
...
12
13
14
15
16
...
»

Содержание 1041130






















Отзывы:

Нет отзывов