CPA 1041130, Руководство пользователя, Страница: 13 / 21

BLUEFIRE HEAT PUMPS MANUAL
pag. 13 di 20
www.cpa-piscine.it
Ver.06 – 2018-05-28
In stand- by mode, press the “SET” button for 3 seconds and enter the setting mode
of the clock, the hours will flash on the display.
Press “SET” once more and t hen set the number of hours using the scroll up and scroll down buttons.
Once the number of hours has been selected, press “SET” and move with the buttons scroll up - scroll down to
set the minutes.
Then confirm by pressing “SET” once more.
If, on the other hand, no button is pressed within 5 seconds, the system automatically returns to the initial
starting state
.
In stand by modality
Press for 3 seconds the button to enter in setting timer modality , with the writing of
flashing hours
Press the button again to change the start time.
With the buttons scroll up - scroll down to move in order to select the desired number of hours and minutes.
Repeat the operation described above to adjust the minutes
.
Then press the button again to be able to change the shutdown time.
With the buttons scroll up - scroll down to move in order to select the desired number of hours and minutes.
Repeat the operation described above to adjust the minutes.
Then press the “SET” button to exit the timed start / shutdown mode and return to the de fault state
If no button is pressed within 5 seconds, the system confirms the current timing setting and
automatically returns to the initial default state.
To reset the programming, press and hold the button until
the hour will flash, then press set to exclude the timer and return to the initial screen
.
5.
TIMER SETTINGS
6. START / STOP PROGRAMMED BY CLOCK