CP CPM, Инструкция по эксплуатации, Страница: 30 / 48

Instruction manual for spiral mixer mod. CPM80-200
30
NOTE:
•
The phase 1 starts with a delay in relation to the water dosing.
•
The 3 phases are carried out in sequence with a fixed 3 second delay between the
first and second phase in order to obtain the complete stop of the bowl before the
inversion.
•
Only in phase 2 of the automatic cycle the button can be used with the
following function: while it is kept pressed, the bowl stops its rotation for 2", then
it inverts the sense of rotation until the button is kept pressed. When released, the
bowl stops again for 2" and it starts the anticlockwise rotation. The phase 2 timer
continues the timing regularly and the spiral always rotates.
•
Phase 3 follows immediately phase 2.
MANUAL CYCLE:
•
All the phases described can be performed also in the manual phase by selecting
the button : the figure “MA” will appear on the program display and all the
other displays will be at zero. To select the phases it is sufficient to press the
corresponding button and the display starts to flash. Pressing the start button the
corresponding phase start with the display counting the time. Pressing stop the
phase stops and the time remains fixed on the display. Pressing the stop button
once again the timing goes to zero.
•
If the button 2 and 3 are pressed during phase 1, nothing happens.
•
Viceversa it is possible to press the button while in phase 2 and pass directly
in phase 3.
•
With the machine stopped it is possible to start from any phase, but in phase 3 it is
not possible to start directly: the machine does 5” in phase 2 before passing to
phase 3
•
The machine can be stopped pressing the button
•
In manual mode the doser works seperately in relation to the mixers functions.
To go back to the automatic cycles, press again the button .
NOTE:
With the protection grid open the machine stops immediately. Only the following
functions remain active :
•
Rotation of the bowl with the two buttons
•
Doser in manual position
NOTE:
When any of the protections are open , the cycle does not start automatically again,
but it is necessary to press start.
9