CP CPM, Инструкция по эксплуатации, Страница: 19 / 48

Instruction manual for spiral mixer mod. CPM80-200
19
4.3 Transport
The instructions given in this section must be carefully followed when transporting the
machine. This operation may include the following situations :
•
Storage of the machine
•
Initial installation of the machine
•
Re-location of the machine.
TRANSPORT CONDITIONS
The machine and its equipment can be transported in the following ways, according to
the customer’s requirements :
•
In a wooden box pallet
•
By road vehicle
•
In each of these cases, before transport or handling, the various accessories
must be packed and fastened to the machine.
NOTE: Follow standard precautions to avoid collisions and tipping over.
LIFTING
DANGER:
•
It is forbidden to climb onto the machine and/or its packing or stop and/or pass
under the machine during handling.
•
Access to the lifting and handling area is denied to all personnel except those
directly involved in the operations.
•
All operators should remain at safe distance in order to avoid being hit by the
machine or any of its parts which may accidentally fall.
•
Before starting the lifting operations the whole of the machine handling area,
including the parking area for the means of transport and the machine installation
area, should be identified and inspected in order to detect any potentially
hazardous areas.
•
Use a bridge crane, a crane or a forklift truck with adequate lifting capacity. The
use of inadequate lifting equipment may cause damage to the machine or injury to
the personnel.
•
Check that the hoisting cables or ropes are equipped with a bell and have the label
which contain all the manufacturer’s details and that the lifting capacity is clearly
stated.
•
Check the cables or ropes before each lifting operation. Do not use them if they
are damaged or worn or have broken strands or wires.
•
Never twist or knot ropes or cables. Always follow the instructions supplied by the
manufacturer.
•
Follow the same precautions when using chains or belts.