12/13
Use and Care Manual
1.On/Off :
•
When you press the button, the ON/OFF lamp illuminates, the chair is in idle, and start to work
when you press any other function buttons.
OPERATION GUIDES
When you want to suspend the operation in the
middle or have felt some abnormity with your body.
•
operation stops,and all the lamps will extinguish.
press the ON/OFF button
2. ZG :
When you press the button, the back rest, foot rest, and seat are automatically adjusted
to prearranged reclining angles.
•
Reclining can be stopped during the reclining motion by pressing either the ZG button,
Recline/Rise,.
•
When the reclining motion is stopped by pressing buttons other than the ON/OFF button,
press the desired button for motion.
•
After achieving the ZG position, as this frame foot rest go sync with back rest.
5/6.Air massage Program Relax & Stretch:
Press the button for the preferred program, and press again when -you need to stop it.
•
After air massage mode is activated, when you change the angle of chair, the air massage will
be paused, and resume automatically until the chair stabilize.
Relax
Stretch
3/4.Chair Recline/Raise (recline) (raise)
Press the button to activate the chair motion, and press again when the desired angle is
achieved.
•
The angle of the seat will be changed automatically in accordance with the angle of the back
rest.
•
The motion can be stopped by pressing either the ZG button, or Recline/Raise.
•
During the back rest motion, the chair has no response when you press either Heating or
Relax/Stretch.
NOTE
•
Be sure to check that there is no-one or any pets around the chair prior to adjusting the
back rest. It may result in an accident or injury.
