Use and Care Manual
02/03
Wellness for Home
STEP 2:
STEP 1:
TWO PEOPLE ARE RECOMMENDED
FOR BACK CUSHION ASSEMBLY!
1
3
3
B
A
Place the pre-assembled Seat Cushion, Mechanism and Wood Base (1) on a
protected surface to avoid scratching while assembling. Attach Arms (3A & 3B) to the
Seat Cushion (1) by sliding the pre-attached metal brackets at the sides of the Arms
(3A & 3B) into the pre-attached metal brackets on the Seat Cushion (1). Press down
firmly on each arm until fully engaged.
STEP 3:
After assembling the Back Cushion (2) to the Arms (3A & 3B), push the Back Cushion
(2) backwards and slide the Seat Cushion (1) to the front for easy assembly. Align the
holes of each bracket on the bottom of the Back Cushion (2) to the metal rings on the
rear of the Seat Cushion (1). Insert the 1" Big Screws (7) through the metal rings in the
Nuts (8) and tighten the screws. If the holes do not align easily, ensure from Step 1
that arms are pushed down firmly and fully engaged.
Lift and place the Back Cushion (2) on the Seat Cushion (1), then open the zipper
located on the Back Cushion (2) and align the holes on the Back Cushion (2) with the
holes on the Arms (3A & 3B) and attach by using the 3" Long Screws (9). After tighten-
ing the screws, close the zipper.
9
2
3B
7
8
14
14
2
1
● Read the assembly instructions thoroughly and assemble the
recliner per the assembly instructions.
● Please note that using an incorrect assembly method may damage
the structure of the recliner!
● Please note that the air pressure or heating massage function will
stop automatically after 15mins as the auto timer is 15 mins.
