1018454-D
Page 18
A
48
50
STEP 7-A.
Make certain wiring connections are tight before proceeding and secure so they
will not be able to contact high temperature locations.
A.
Route the wires around the back edge & inside the heater
housing. Bundle wires neatly with a cable tie (
48
) attached to
the Z-shaped bracket inside the liner.
B.
Bundle the wires against the valve bracket. Fix the wires in
place neatly by attaching them with a cable tie (
48
) to the valve
bracket (
50
).
Do not allow the bundled wires to hang beyond the edge of the
valve bracket (
C
) and keep the bundled wires below the lower
part of the burner (
D
).
NOTE: Keep all wires away from the burner.
...continue to page 20.
B
48
D
C
50
48
48
FOLLOW THIS STEP IF THE PILOT PRO
IS ON THE
RIGHT
SIDE OF THE HOUSING.
(Proceed to step 7-B if the Pilot Pro is on the left side of the housing).
50
A
B
ELECTRICAL CONNECTION
WARNING:
Please Use Caution While Installing the Electrical Connection
