COX CXO300, Руководство по установке

Страница: 4 / 60

4 CXO300 INSTALLATION MANUAL
1.0 INTRODUCTION
1.0
INTRODUCTION
1.1 INTRODUCTION
The purpose of this document is to define the procedures or steps that are required to be done in order
to do a safe and correct installation of a CXO300 outboard engine(s).
The different systems of the outboard(s) are designed to work together continuously to provide a safe
and reliable boating experience.
Any modifications to the outboard(s) or deviation to installing the units to as described in the procedures
of this document, is likely to affect safety, legality and longevity and should be expressly avoided.
1.2 EMISSIONS-RELATED INSTALLATION INSTRUCTION (USA)
In order to ensure emissions compliance of the installed outboard(s), it is essential that the processes
and requirements detailed in ‘Section 8.0.0’ of the document are adhered to.
Failing to follow these instructions when installing a certified engine in a vessel violates federal law
(40 CFR 1068.105(b)), subject to fines or other penalties as described in the Clean Air Act.
This product is EPA Tier 3 compliant and can be used on US flagged vessels. To support US registered
vessels to operate internationally, this marine engine is also certified to IMO Annex VI Tier II
standards, and may therefore be limited to use on new and/or non-exempt vessels that meet one of
the following criteria:
1
Recreational vessels < 24 meters in length under Annex VI Regulation 13.5.2.1
2
Vessels with a Tier III exemption for combined nameplate of <750kW due to ships design or
construction limitations under Annex VI Regulation 13.5.2.2
3
Recreational vessels of >24m with gross tons < 500, and a keel laid date < January 1, 2021, per
Annex VI Regulation 13.5.2.3
If you install the engine in a way that makes the engine’s emission control information label hard to
read during normal engine maintenance, you must place a duplicate label on the vessel, as described
in 40 CFR 1068.105.