Coway Airmega 250, Руководство пользователя

Страница: 16 / 92

Air quality indicator
This indicator displays the indoor air quality in
LED colors.
Good (blue) → Moderate (green) → Unhealthy
(yellow) → Very unhealthy (Red)
2
3
Press the [Mode] button to adjust it to the
desired sensitivity.The mode indicator
blinks as shown below once sensor
sensitivity has been selected.
Press the [Mode] button and the [Speed]
button at the same time for more than
about 2 seconds, the selected sensitivity
will be inputted and the product will start
operating normally.
· If the [Speed] button are not pressed for 10
seconds,the selected sensitivity of the sensor is
automatically entered.
1 2 3
Sensitivity Sensitive Normal
Less
sensitive
Air quality indicator
16
04 OPERATION
Checking the Air Quality
You can easily check the current air quality around the product using the air quality indicator on the front of the
product.
Adjusting the Sensor Sensitivity
You can adjust the pollution sensor's sensitivity.
NOTE
For 250S/250 users, you can also check the current air quality in the smart phone application.
1 While the product is operating, press the
[Mode] button and the [Speed] button at
the same time for more than 2 seconds.
The speed indicator blinks to display the
current sensor sensitivity level.
·
Initial sensor sensitivity is at the normal level.