manualshive.com logo in svg

Covidien Nellcor, Руководство оператора, Страница: 37 / 120

Поделиться
Скачать
Covidien Nellcor Скачать руководство пользователя страница 37

User Interface

 Operator’s Manual

 27

To power on the monitoring system:

1.

Press the 

Power On/Off Button

 for more than one (1) second. 

2.

Ensure the software version, the SpO

2

 alarm indicator, and the pulse rate alarm 

indicator light for approximately two (2) seconds.

Figure 4-1.  

Sample Initial Screen

3.

Ensure the 

POST pass

 tone sounds when POST completes.

Note:

Do not use the monitoring system should a repeating, high-pitched alarm tone occur at 
power on. Instead, please contact Technical Services or a qualified service technician.

4.3.2

Turning off the Monitoring System

After using the monitoring system, turn it off safely.

To turn off the monitoring system:

1.

Press the Power On/Off button on the right of the device for approximately one second. 

2.

Observe the message 

System is shutting down

 on the screen.

Note:

Press the Power On/Off button for at least 15 seconds to turn off the monitoring 
system after any situation involving continuous resets or a system lock.

Содержание Nellcor

























































































































Отзывы:

Нет отзывов