5
GENERAL MAINTENANCE
For more detailed Routine maintenance see Pages 9
– 20
Keep the conveyor clean, particularly under and around the loading section.
Belt
•
Check belt tension and adjust if necessary by evenly tightening
adjusting nuts situated either side of the conveyor tail section.
(See details below)
•
The correct tension is the minimum required to maintain drive to
the belt.
Gearbox
•
Lubricated for life; check oil seals on output shaft for leaks.
•
If the gearbox starts leaking please contact our service
department immediately.
TENSIONING &TRACKING POINTS
OVER TENSIONING WILL CAUSE BREAKDOWNS
THEREFORE DOWNTIME!
Tail adjusting stud
Loosen nuts and adjust
Head adjusting stud
Loosen nuts and adjust
Loosen all four bolts before
tracking
