3
OPERATING INSTRUCTIONS
•
If you cannot lock off the power supply, unplug the conveyor from the
starter or main power supply or transformer.
•
Visually inspect all external electrical connections.
•
Check for materials jammed between the belt and conveyor structure.
•
Check for material build up on any of the rollers or side guides.
•
Ensure area under and adjacent to, the loading/tail section is clear of
debris.
•
Check external belt scraper for tension (if fitted).
•
Inspect belt & clip joints for damage and wear, also check the tension
of the belt, if you find any damage to the belt or joints, inform our service
department immediately so it can be dealt with ASAP to avoid
unnecessary & expensive damage.
•
If the conveyor is on stands or scaffolding, check the tightness of all
bolts or scaffold clips. Clear out any debris or build-up of material from
the back and underside of the tail section.
•
If the conveyor is on moveable castors, ensure that wheel brakes are
locked on before conveyor is started.
•
Inspect the condition of the hopper rubber skirts (if fitted).
•
Check E-stops are operating (if fitted).
•
Check head guard is fitted securely (if applicable).
•
Visually check on all nuts and bolts on rollers and feed hoppers.
WARNING!
ISOLATE AND LOCK-OFF SUPPLY BEFORE INSPECTION
ANY DEFECTS SHOULD BE
REPORTED IMMEDIATELY
