STOP
DO NOT RETURN TO THE STORE!
PAGE 3 OF 8
FIGURE 1
GLASS
HEX. KEY WRENCH 10MM
HEX. KEY WRENCH 4MM
BOLT M6*15
COVER
UPPER CONNECTOR
LOWER CONNECTOR
TABLE TOP
FRONT DOOR
BOTTOM FRAME
FRAME 1
REAR FRAME
47XA4935
27XAA103
27TAN00030
TMS54GM-CS05-1
TMS54GM-CS10-5
TMS54GM-CS04-7
TMS54GM-CS10-9
TMS54GM-CS10-3
1
1
10
1
15
16
14
12
11
1
1
1
1
1
1
1
1
9
8
7
6
5
4
3
2
Q’TY
1
PART
MATERIAL CODE
PART
NO.
Q’TY
PART
MATERIAL CODE
PART
NO.
PARTS LIST
TMS54GM-CS24-2
17KAC3101----Y3
1
17KAA0101----Y4
17C40A0705001YX
13
BOLT M6*25
4
10
17C40A0709001YX
11
1
2
3
15
#11 BOLT M6*15
62TMS54GMQ101
17C17A1506001YX
1
2
CROSS BRACE
SCREW ST4.8*16
Before assembly, open all of the packaged cartons.
Lay out all of the parts on a level, non-abrasive
surface. Open the hardware kit for all of the nuts,
bolts, and washers. Make sure that you have all of
the parts listed. If any parts are missing or
damaged, call the help line at 1-877-539-7436 before
returning this item to the store.
Attention:
Make sure that each bolt needed for all steps matches
the corresponding figure to ensure proper assembly.
Step 1:
Fasten the frame 2 (#2) and the frame 1 (#3) to the
rear frame (#1) by using bolts (#11). Keep the bolts
loose. See Figure 1.
Note: Parts come in more than one carton.
Note:
The labels marked “2” and “3” on the frames should
coincide with Figure 1 to ensure proper assembly.
You will need the following tools:
- Phillips Screwdriver (Not included)
- Hex. Key Wrench (See Part #12)
- Hex. Key Wrench (See Part #13)
FRAME 2
TMS54GM-CS04-8
V-3
