Step 6:
Fasten another seat and back support
brace (#6) to the back of two seat
assemblies (#7) by using bolts (#16) and
washers (#19). See Fig. C.
Note:
Make sure the two arcs of the seat and
back support brace (#6) should be facing
outside.
Step 7:
Insert the left and right swing arms (#8
and #9) into the seat and back support
braces (#6). Fasten them by using bolts
(#16) and washers (#19).
See Fig. D and Fig. E.
Step 8:
Fasten the swing arm tubes (#10) to the
front hole of the seat swing arms (#8 and
#9) by using bolts (#15), washers (#19)
and plastic nuts (#20). Then fasten the
swing arm tubes (#10) to the back of the
seat swing arms (#8 and #9) by using
bolts (#15), washers (#19) and plastic
nuts (#20). See Fig. F.
PAGE 4 OF 6
Fig. E
Fig. D
Fig. C
R
L
Note:
The labels marked “L” and “R” on the
swing arms (#8 and #9) should coincide
with Fig. D to ensure proper assembly.
Fig. F
STOP
DON’T RETURN TO STORE!
