Step 9:
Hook the suspension spring (#22) to the
top of the swing arm tubes (#10), and do
the same for the other side. See Fig. G.
Step 10:
Hang the other side of suspension
spring (#22) into the hole of each side on
the angled braces of the top cross beam
w/adjustable teeth (#1). Do the same for
the other side. See Fig. H.
Warning:
Make sure that both ends of the suspension
springs (#22) go completely through the
holes of the angled brace on part (#1) and
swing arm tubes (#10).
Step 11:
Insert the canopy/frame connectors (#23)
into the U-shaped side canopy brace (#12)
and secure with screws (#17).
See Fig I - Step 1 and Step 2.
Note: Make sure that the teeth of cabopy/
frame connectors (#23) are facing towards
the inside.
Step 12:
Insert the front/rear canopy braces (#11)
into the sleeves of the canopy (#26).
See Fig I - Step 3.
Step 14:
Slip the four corners of U-shaped side
canopy brace (#12) into the pockets of the
canopy (#26). See Fig I - Step 5.
Fig. I
Fig. H
Fig. G
PAGE 5 OF 6
Step 5
Step 4
Step 3
Step 1
Step 2
Step 13:
Insert the front/rear canopy braces (#11)
into the U-shaped side canopy brace (#12).
See Fig I - Step 4.
STOP
DON’T RETURN TO STORE!
