COUNTERFOG® PILAR 1.0
DATE: 24/03/2022
CLASSIFICATION: PUBLIC
VERSION: 1
20 |
P á g i n a
C
O
U
N
T
E
R
F
O
G
®
E
B
T
D
E
L
A
U
A
H
S
L
A
v
.
D
e
E
u
ro
p
a
8
2
.
V
a
ld
e
m
o
ro
,
M
a
d
ri
d
(
S
p
a
in
).
i
n
fo
@
c
o
u
n
te
rf
o
g
.e
u
w
w
w
.c
o
u
n
te
rf
o
g
.e
u
o
Fill your Counterfog® PILAR with
1 liter of drinkable water
(0.26
gallons).
o
Tilt the Counterfog® PILAR slightly to both sides so as to drinkable
water is being mixed with the remaining disinfectant in the walls of the
device.
o
To evacuate the remaining liquid from Counterfog® PILAR, place a
suitable container (compatible with the disinfectant) under the device
since the residual disinfectant will come out through the Teflon hose
indicated in the following image.
o
Open valve 4 (
open 4 “EMPTY”
) and the liquid is evacuated.
Always wear gloves and safety glasses when evacuating the
residual liquid from the device!
o
When finish evacuating liquid, close valve 4 (
close 4 “EMPTY”
).
o
Screw the cap to the funnel (
screw 12
).
o
Open the vent valve (
Open 11 “VENT”
).
o
Open the filling valve (
Open 3 “FILL”
), open the empty valve (
OPEN 4
“EMPTY”)
and check the other valves remain closed
(6 “LIQUID “and
7 “AIR” closed).
o
Plug the equipment
to the 120 V/60 Hz supply line.
o
Activate the switch on the left (
Activate switch 1
) (
yellow arrow in
the figure
) which activates the fan.
o
Activate the switch on the right (
Activate switch 2
) (
green arrow in
the figure
) which activates the compressor.
Please, follow the correct order of activation of the switches.
