Count KF-250, Руководство пользователя

Страница: 6 / 27

6
ELECTRICAL SPECIFICATIONS
Power Requirement: 110v/60 HZ or 220v/50 HZ, AC 20 AMP
Circuit Protection: 20/5 AMP Circuit Breaker
NOTE: Older buildings, overloaded lines, and bad grounds can affect the operation of your KF-
250. A regulated dedicated line is recommended.
Operating the machine through a power
strip is not recommended.
SAFETY PROCEDURES
BE ALERT! BE CAREFUL!
BEFORE USE:

Read through the owner’s manual. Follow instructions CAREFULLY.

Do not install the machine on uneven ground.

NEVER use in a wet area. Electric shock could occur.

Use at least a 20 amp power source at 110 vac.

Use a GROUNDED outlet and a GROUNDED circuit. Do not use ungrounded
equipment on the same circuit.

Always use a dedicated line. DO NOT use with line splitting surge protector.

Make sure all safety covers are in place. The top cover has an interlock switch which
will disable the unit if in the up or open position.

Open and close the plastic cover slowly.
DURING USE:

Exercise caution with long hair and loose fitting clothes when near the machine nip
in operation.

Keep fingers and hands away from belts, folding blades, and rubber rollers.

Keep fingers away from any moving part.

Keep cords clear of moving parts.

Do not place any liquid on any surface of machine.

Do not put heavy matter on machine.
AFTER USE:

Turn off machine at the side cover, then unplug the main power cord. This will
prevent damage to your machine by power/voltage spikes.

To unplug cords, always grasp the plug body, never pull on cords to disconnect.
Wire fatigue and possible shock could result from improper disconnect procedures.

Disconnect the power before cleaning the inner machine.

Clean all rollers, belts and moving parts.

Cover the Machine.