14
KNOB SETTINGS / GAP ADJUSTMENT
This adjustment is very important and affects the operation of the machine dramatically. The
knobs are positioned from left to right. Knob 1 is on the left and knob 2 is on the right. Knob 1
controls gap 1 and knob 2 controls gap 2. The knob setting screen will display the
recommended setting below the image. This is a starting point and some adjustment may need
to take place once this setting has been made. Example if you are getting motor lock ups or
paper jams you will need to increase the gap adjustment on knob 2. If you are getting
registration or skewing you may need to adjust the gap lower on knob 1. It is important to read
the warning on the side of the knob setting screen. The following gap adjustments are the
suggested for the paper weight and fold patterns listed. Note: the finished results can be
affected by the type of stock, type of finish, grain direction, and quality of paper. The values
listed in the table are only suggested values.
Make sure the setting is correct on the machine before pressing the OK, I HAVE MADE THE
ADJUSTMENT Button.
Содержание KF-250
Страница 2: ...2 Page left blank intentionally...