15
MEASURE SHEET
The KF-250 will automatically set the distance of the fold using the smart measure feature. With
one sheet on the register guide or ready to feed from the creasing machine press the start
measuring button. The knife blades will move into position, then the transport will start to run,
feeding in the sheet. Depending on the thickness of stock you selected, the sheet will either
feed out the slot in the top of the plastic cover or the bi-pass tray.
Once measured press accept to go to the run screen.
RUN SCREEN
On the Run Screen there is a counter that will count how many sheets are run through the
machine. It can be reset by pressing the counter reset. When the run button is not selected you
can jog the machine forward and backward using the jog arrows. There is an adjust button that
will allow you to micro adjust the distance for each fold. There is a fold blade control button
that will allow you to adjust the knifes manually out of the way if necessary to clear a paper jam.
There is a parameters button that is used to change the default offsets of the machine. This is a
password protected button. If you feel you need to change the default parameters please
contact our customer service department for instructions.
Содержание KF-250
Страница 2: ...2 Page left blank intentionally...