Count Dyna-Cut, Руководство пользователя

Страница: 15 / 18

DYNA-CUT 15
SETTING UP THE PAPER PATH
1. Raise the elevator all the way up with paper loaded.
2. Press the feed roller release button on the control
panel
3. Slide the first page forward until it is just entering
the marble rack.
4. Adjust paper stack guilds by loosening them then
slide both while keeping them tight to the paper
stack. Adjust the whole stack so that the first page
about an 1/8” from the alignment ledge.
5. Move first page back and press the feed roller
release button.
6. Run a test sheet if you need to adjust your side
margin make your adjustment then restart at step
one.
At the start of a new run you will want to align the
feeder closely with the marble rack in order to minimize
skew. To due so follow the instructions below.