16
17
The LCD Screenis used as the information center for your unit.
The LCD screen will display the current grill temperature
(ACTUAL) and meat probe temperature (MP1).
SeeTroubleshooting for more information on error codes.
Press and hold the Prime Button to activate an extra feed of
pellets to the fire pot. This can be used to add more fuel to the
fire just before opening the barrel lid, resulting in a quicker heat
recovery time. It can also be used to add more fuel while
smoking,to increase the intensity of clean smoke flavor.
Overfeeding the fire pot may damage to grill barrel paint.
The Temperature Switch Button is used to change the
temperature readout on the LED Screen.Press the button to
switch to Fahrenheit (°F) or to Celsius (°C)
，
as preferred.
Default is set to Fahrenheit.
UNDERSTANDING THE CONTROL BOARD
FEATURE
DESCRIPTION
Flashing
Screen
Indicates the unit was just connected to AC power.
Screen flashes three times, then turns off.
MP1
Indicates the meat probe temperature when
probe is connected.
Indicates the auger motor is turning and
feeding pellets to the fire pot.
Indicates the igniter is on. When first starting
your unit, the igniter runs continuously for the
start-up cycle.
Indicates the fan is running. If the grill is in
operation, the fan is on.
Indicates the auger motor is no longer able to
feed pellets to the fire pot. Likely, the hopper is
empty and requires refiling.probe is connected.
Actual
Indicates the current temperature of unit.
Indicates the desired temperature that has
been selected.
Indicated that no meat probe is connected.
Er1
Er2
Er3
Set
noP
Temperature probe wire not connecting.
ErH
Failure to reach minimum temperat of 130F
during start-up cycle.
ErP
Motor
Ignitor
Fan
No Pellet
Fire has gone out due to lack of fuel.
Grill has overheated.
Power loss during operation.
READOUT DESCRIPTION
ID
DESCRIPTION
