10
11
3. INSTALLING THE COOKING COMPONENTS
4. CONNECTING THE POWER CORD
Insert the flame broiler main plate
into the main grill, right side first.
Rest the flame broiler main plate on
the built-in ledge (on the inside
right) of the main grill that directs
grease towards the grease bucket.
Slide the entire piece to the left
side, and the two slots on the flame
broiler main plate will fit into the
rounded ledge above the fire pot. It
will sit slightly at a downward
angle. Note illustration
3A
.
Place the flame broiler slider on top
of the flame broiler main plate,
covering the slotted openings. Ensure
the raised tab is on the left, to easily
adjust for direct or indirect flame
when cooking. Note illustration 3B
.
NOTE:
When the flame broiler slider is
open, and direct flame is used while
cooking, do not leave the grill
unattended for any period of time.
NOTE:
To maintain the searing and
grilling performance of your cooking
grids, regular care and maintenance Is
required.
Parts Required:
x1
Flame Broiler Main Plate (#4)
x1
Flame Broiler Slider (#3)
Parts Required:
x1
Main Barrel/Hopper Assembly (#7)
x1
Power Cord (#8)
Installation:
•
Insert the end of the power cord
through the hole in the back panel
of the grill.
Installation:
•
5. ATTACHING THE GREASE TRAY
Parts Required:
x1
Grease Bucket (#15)
Place the grease tray on the two
screws of the main barrel. Ensure it
is level to avoid grease spills.
Installation:
•
The unit is now completely assembled.
•
•
Place the cooking grids, side-by-side,
on the grid ledge inside the main
grill. Place the upper cooking rack on
the upper ledge inside the main grill.
The cooking rack will lock into place.
Note illustration
3C
.
•
C
