CHARGE THE JUMP STARTER BATTERY
NOTE:
●
Charge the built-in battery in the jump starter before using it for the first time.
●
Check the charge level in the built-in battery by pressing the battery control
switch and reading the indicator lights. If the red indicator light comes on, the
battery should be charged.
●
Always keep the battery fully charged for best results and battery life. The
battery capacity and lifetime will be affected if it is left discharged for a long
time.
●
Charge the built-in battery in the jump starter every three months if not used.
●
The battery will last longer if you follow the instructions below.
- Charge the battery before using it for the first time.
- Charge the battery fully after each use.
- Charge the battery fully every 3 months.
1. Connect the charger to a mains outlet.
2. Connect the charger plug to the socket.
- The three indicator lights flash in turn to show that the built-in battery is being
charged.
- It takes 6-40 hours to charge the built-in battery fully, depending on the
condition of the battery.
- When the battery is fully charged, the green indicator light comes on. Allow
charging to continue if possible, to prolong battery life.
3. Disconnect the charger.
POWER SUPPLY VIA 12V OUTLET
NOTE:
●
The outlet has overload protection with automatic reset.
●
The internal battery in the jump starter can be emergency charged from the
vehicle's 12V outlet. However, it cannot be charged fully in this way. Use the AC
charger in the usual case.
1. Open the cover over the outlet.
2. Connect the 12V product to the outlet.
06
