JUMP STARTING OF ENGINE
WARNING:
●
Make sure the vehicle battery is 12V, or there will be a risk of explosion and/or
serious injury.
●
Before you start the jump starter, make sure the clamps are connected with the
right polarity.
●
Follow the instructions below, otherwise there is a risk of personal injury
and/or material damage.
1. Switch off the ignition and all systems (lights, radio, air-conditioning etc.) in
the vehicle.
2. Connect the red positive clamp (+) on the jump starter firmly to the positive
terminal (+) on the vehicle battery.
3. Connect the black negative clamp (-) to the negative terminal (-) on the
battery or to a metal part of the vehicle. If the connection is made correctly, the
green light will come on.
4. Put the switch in the ON position.
5. Turn the ignition key to try to start the engine. Do not hold the key turned for
more than 5 seconds.
6. If the vehicle does not start, wait for at least 3 minutes and try again.
7. If the engine starts, set the power switch to the OFF position.
8. Disconnect the black negative cable (-) and put it away.
9. Disconnect the red positive cable (+) and put it away.
10. Recharge the built-in battery in the jump starter as soon as possible.
COMPRESSOR
WARNING: The compressor can be run continuously for maximum 10 minutes
and then it needs to cool down for at least 10 minutes. When inflating tires, the
pressure rise very quickly - pay attention.
07
