SAFETY INSTRUCTIONS
Read the user instructions carefully before use.
Save them for future reference.
WARNING:
●
Wear safety glasses. Incorrect handling may cause a risk of personal injury if
you get battery acid in your eyes, rinse your eyes with clean water for at least 10
minutes and then seek medical attention immediately.
●
If the jump starter is handled wrongly, there is a risk of explosion and serious
personal injury and/or material damage.
●
When the jump starter is not in use, the black inverter power switch should be
in the OFF position, to avoid the risk of personal injury and/or material damage
if the clamps short-circuit.
●
Never short-circuit the clamps with any metal object or by allowing them to
touch each other.
●
Check that the vehicle battery is 12V, or there will be a risk of explosion
and/or serious injury.
●
Before you start the jump starter, check that the clamps are connected with the
right polarity, otherwise the device or the battery could explode and cause
serious injury and/or material damage.
●
CAUTION:
The jump starter cannot be used to replace the vehicle's own
battery.
●
Only use the built-in charger. Other chargers may shorten the lifetime of the
battery or cause it to explode and cause personal injury or material damage.
TECHNICAL DATA
AC ADAPTOR
Model
Voltage
Amps
Battery type
GM022IC
12V
600A cranking amps
（
5s
）
Lead-acid battery 12V 22AH
ETL certificated
INPUT 120V AC, 60Hz, 0.25A
OUTPUT 12V DC 1A
03
