Standard Operation Procedure
11
Cleaning
Safety Tray Drain
The drain collects water after cleaning or
sanitizing, so that it can be drained without
removing the safety tray.
If water leaks from around the drain, tighten
down the bolts securing it to the safety tray.
Figure 22: Safety Tray Drain
Cleaning the Hopper
To clean the hopper, start by rinsing it out
with lukewarm water while cycling the
depositor continuously. After the hopper has
been rinsed, fill it back up and add cleansing
solution. Scrub the hopper side walls and then
rinse the hopper.
Figure 23: Cleaning the Hopper
Cleaning Depositor Components
After cleaning the hopper, remove the product
valve and product pistons. Remove the O-rings
for both items and clean them. Check all
components and O-rings for damage.
Figure 24: Cleaning Depositor Components
