Standard Operation Procedure
9
Scale
The scale is used to measure the deposit
amount after each deposit. If the scale
calibration is off, please contact the scale
manufacturer for assistance.
Figure 16: Scale
Safety Tray
The safety tray allows the user to place the
product pan in and to trigger the deposit with
both hands. Both triggers must be pressed
simultaneously, and only one deposit occurs
when the triggers are held down. This is a
safety feature because both hands must be on
the triggers for the depositor to cycle.
Figure 17: Safety Tray
Safety Tray Setup
Slide the tray into the correct position. Attach
quick-release airlines to the correct fittings on
the side of the depositor. The depositor will
only dispense if both hand triggers are pressed
simultaneously.
Figure 18: Safety Tray Setup
