Costcare L400C, Руководство пользователя

Страница: 26 / 39

25
5.3.3 Transferring the patient for using a bath
I. Move the patient from the bed onto the wheelchair, refer to Transferring the
patient to a wheelchair section of this manual.
II. The patient should be elevated high enough to clear the wheelchair and their
weight supported by the lift.
III. Lower the patient into the portable bath tub.
IV. Disconnected the chains/straps from sling and reattach to the portable bath tub.
V. With the lift, raise the sides of the portable bath tub.
VI. Bathe the patient.
VII. To return to the bed, reverse procedures concerning lifting the patient, operation
and sling attachments.
5.3.4 Transferring the patient to a wheel chair
WARNING
The wheelchair wheels MUST be locked before lowering the patient into the
wheelchair for transport.
I. The legs of the lift (with patient) shall be in open position.
II. Move the wheelchair into position.
III. Ensure the rear wheels of the wheelchair are locked to prevent further movement
of the chair.
IV. Position the patient over the seat with their face away from seat and their back
against the back of the chair.
Use the straps or handles on the side and the back of the sling to guide the patient’s
hips as far back as possible into the seat for proper positioning.
V. Lower the patient by pressing the DOWN ( ) button on the lift controller.
VI. With one assistant behind the chair and the other operating the patient lift, the
assistant behind the chair will pull back on the grab handle (on select models) or
sides of the sling to seat the patient well into the back of the chair. This will
maintain a good center of balance and prevent the chair from tipping forward.
VII. Disconnect the sling from the patient lift.
VIII. To return to the bed, reverse procedures concerning lifting the patient, operation
and sling attachments.