AE & AWB
This page provides access
to set the exposure and white balance of the network camera.
• Exposure Control
Configure the exposure settings to suit the image quality requirements in relation to lighting
consideration.
- Mode:
Supports exposure modes to control the amount of light detected by the camera
sensor based on settings for light conditions. The default setting is Auto with DC-IRIS.
*
Automatic:
Automatically sets the amount of light detected by the DC-IRIS and AGC.
*
Hold Current:
Fixes the exposure at its current state.
- Value:
Select a value in the drop-down list to tune the exposure. The default setting is 3.
-
AGC:
Select a value in the drop-down list to s
pecify the level according to the screen
luminance.
The default setting is 36dB.
- Enable automatic IRIS adjustment:
This checkbox should always be set to be checked,
except during focusing, or when using a fixed iris lens.
- Enable Backlight Compensation:
Set this checkbox to activate the BLC operation.
- Enable automatic IRIS adjustment:
This checkbox should always be set to be
checked
,
except during focusing, or when using a fixed iris lens.
30
