Costar CDIH226VIRF Скачать руководство пользователя страница 65

Страница: 65 / 74

• Restore

Import and apply a setting value saved to a user PC.

Note:

Backup and Restore can only be used on the same unit running the same firmware. This

feature is not intended for multi-configurations or for firmware upgrades.

7) Support

The support page provides valuable information on troubleshooting and contact information, should
you require technical assistance.

• Logs

The network Camera support system log information. Click the System Log button to get the log
data.

• Update Server

Server Report:

Click the Server Report button to get the important information about the

server’s status and should always be included when requesting support.

Parameter List:

Click the Parameter List button to see the unit’s parameters and their

current settings.

3.5.6 About

The following website will provide the support information for the Network Camera information and
operation.

Содержание CDIH226VIRF











































































Результаты поиска

Содержание CDIH226VIRF

Отзывы:

Похожие инструкции для CDIH226VIRF

Бренды по названию

Популярные бренды

Costar CDIH226VIRF, Руководство пользователя

Результаты поиска

Содержание CDIH226VIRF

Отзывы:

Похожие инструкции для CDIH226VIRF

Бренды по названию

Популярные бренды