USING YOUR GLASS KETTLE
Figure 2.3
Boiling Water
This kettle should only be used for boiling
water.
Do not
boil other liquids in this
kettle.
1.
Press the
Lid Release Button
to open
the lid.
2.
Fill the kettle to the desired level.
Do
not
fill above the “
MAX
” line. [
Figure
2.1
]
3.
Close the lid and place the kettle on the
power base and plug in. [
Figure 2.2
]
4.
Press the
On/Off Switch
. The blue
indicator light will turn on. [
Figure 2.3
]
5.
The kettle will automatically turn off
once it has finished boiling the water.
Figure 2.1
Figure 2.2
Note:
•
Always
fill the kettle with water to at least
the “
MIN
” line to prevent overheating.
•
You can stop the heating process by flipping
the
On/Off Switch
back up while the kettle
is operating.
•
This kettle has a dry-run safety feature. If
there is no water inside the kettle, it will
automatically turn off to prevent the heating
plate from overheating.
•
If the kettle overheats, fill it with cold water
and wait for 2 minutes before using again.
EN
9
