BEFORE FIRST USE
Water Test
Perform the Water Test before using your
kettle to make sure it’s working properly.
Do not
drink the water that is boiled
during this test.
1.
Remove all packaging from your
kettle and its accessories, including
any temporary stickers.
2.
Completely unravel the power cable
and place the power base on a flat,
level surface.
3.
Press the
Lid Release Button
to open
the lid. [
Figure 1.1
]
4.
Fill the kettle with water to the “
MAX
”
line, then close the lid. [
Figure 1.2
]
Place the kettle onto the power base
and plug in.
5.
Press the
On/Off Switch
. The blue
indicator light will turn on. [
Figure
1.3
]
6.
The kettle will automatically turn off
once it has finished boiling the water.
Allow it to cool for at least 5 minutes,
then pour out the water.
Figure 1.1
Figure 1.2
Figure 1.3
Do not
remove the glass kettle from
the package if it is broken. Contact
Customer Support
immediately to
replace your kettle (see page 11).
CAUTION!
EN
8
