Cosmos XP-702III-A(S), Инструкция по эксплуатации

Страница: 7 / 28

- 5 -
No. Name Functions
1 AT-2G Gas Probe Gas inlet.
2 DF-114 Drain Filter
Protects the Gas Leak Detector from water, dust,
and other foreign matter.
3 FE-106 Dust Filter
Protects the Gas Leak Detector from fine dust,
sand, and other foreign matter.
4 Outlet Gas outlet to exhaust sampled gas.
5 Power/Sensitivity Button
Turns the power ON and OFF.
Sets the gas sensitivity level.
6 Buzzer Button
Turns the alarm buzzer and operation sound ON
and OFF.
Switches the gas types for two-gas model.
7
Restart Pump Button
(Backlight Button)
Restarts pump operation after a pump error. Also
lights the LCD backlight and displays the target gas
name on the LCD.
8 Alarm/Error Lamps (red)
Light up or flash when detecting gas leakage. The
flashing frequency increases as the concentration
of the gas leak increases. The lamps light if the
concentration is very high.
These lamps also flash
when an error occurs in the pump or sensor.
9 Buzzer hole The buzzer sounds.
10
LCD
Displays the gas sensitivity and messages.
(a)
The remaining battery charge is displayed.
Battery charge:
High . . . . . . . . . . . . . . . . . Low
(b)
The target gas is displayed. (The displayed gas
is the target gas. The target gas is not displayed
if the Gas Leak Detector detects only one-gas
type.)
(c) The indicator shows the operation sound. (The
indicator is displayed only when the operation
sound is turned ON.)
(d) The indicator shows the alarm sound. (The
indicator is displayed only when the alarm
sound is turned ON.)
(e) The pump operation is displayed. (The indicator
rotates if the pump is operating normally.)
(f) The gas sensitivity level, target gas name, and
errors are displayed.
11 Gas Sensitivity Lamps (green)
Indicate the gas sensitivity level. There are five gas
sensitivity levels. However, if Freon is the target
gas, only one level is used.
12 Battery Lid The cover to the battery compartment.
13 Gas Name Label The target gas name label.
(a)
(b)
(c)
(d)
(f)
(e)