background image

OWNER’S MANUAL

The
Legacy 3300 is
a professional metal
detector. While the most
difficult aspects of metal detecting
have been automated, it is a
sophisticated electronic device which
requires an understanding of some basic
features and metal detecting concepts.

If you do not have prior experience with a
metal detector, we strongly recommend that you:

1) Adjust the Sensitivity to a low setting in the event

of false signals. 

Always begin use at a reduced

sensitivity level; use at full sensitivity after you have become
familiar with the detector.

2) Do not use indoors.  

This detector is for outdoor use only.  Many

household appliances emit electromagnetic energy, which can
interfere with the detector.  If conducting an indoor demonstration,
turn the sensitivity down and keep the search coil away from
appliances such as computers, televisions and microwave ovens.
If your detector beeps erratically, turn off appliances and lights,
especially those with dimmer switches.

Also keep the search coil away from objects containing metal, such
as floors and walls.

3)

Read this manual. Most importantly, review the 

Quick-Start Demo

(p.7-8) and

Basic Operation 

(p. 9-12)

.

4)

Use 9-volt 

ALKALINE

batteries only.  Do not use Heavy Duty Batteries.

TREASURE HUNTER’S CODE OF ETHICS:

1

. Respect the rights and property of others.

2

. Observe all laws, whether national, state or local.

3

. Never destroy historical or archaeological treasures.

4

. Leave the land and vegetation as it was. Fill in the holes.

5

. All treasure hunters may be judged by the example you set. Always

obtain permission before searching any site. Be extremely careful
while probing, picking up, or discarding trash items. And ALWAYS
COVER YOUR HOLES!

ML3300   08/07

5-YEAR LIMITED WARRANTY

The LEGACY 3300 metal detector is warranted against defects in materi-
als and workmanship under normal use for five years from the date of
purchase to the original owner. 

Damage due to neglect, accidental damage, or misuse of this product is
not covered under this warranty. Decisions regarding abuse or misuse of
the detector are made solely at the discretion of the manufacturer. 

Proof of Purchase is required to make a claim under this warranty.

Liability under this Warranty is limited to replacing or repairing, at our option,
the metal detector returned, shipping cost prepaid to First Texas Products.
Shipping cost to First Texas Products is the responsibility of the consumer.

To return your detector for service, please first contact First Texas for a
Return Authorization (RA) Number. Reference the RA number on your
package and return the detector within 15 days of calling to:

First Texas Products L.P.

1465-H Henry Brennan

El Paso, TX 79936

(915) 633-8354

Copyright

©

2007 by First Texas Products, L.P.

All rights reserved, including the right to reproduce this book, or parts thereof, in any form,

except for the inclusion of brief quotations in a review.

Published by First Texas Products, L.P.

Legacy 3300

®

is a registered trademark of First Texas Products, L.P.

www.detecting.com

Warranty coverage does not include the cost of transporting the detector back to

an owner who is located outside of the continental United States of America.

 

    

Содержание LEGACY 3300

























Отзывы: